![Panasonic - Cylindrical Proximity Sensor [Amplifier Built-in, DC 3-Wire Type] GX-300](https://gcdn.meidianbang.cn/comdata/88589/product/20221103165753097E5CDD639BE08D_b.png)
Panasonic - Cylindrical Proximity Sensor [Amplifier Built-in, DC 3-Wire Type] GX-300
peculiarity
Basic performance up
By increasing the response frequency, it is also suitable for high-speed inspection applications
The ON/OFF judgment of the sensor can respond at high speed, making it suitable for high-speed detection applications.
It also helps to reduce the intermittent time of the unit.
Number of response frequencies
What is Response Frequency?
A rotating plate equipped with a standard detected object at a fixed interval is placed in front of the proximity sensor. The response frequency is the number of times per second that the corresponding detection output is obtained by rotating the rotating plate while observing the detection output.
In other words, a high response frequency is a high-speed response.
e.g. If converted to response speed, then:
1kHz→1ms cycles 5kHz→0.2ms cycles
What is Response Frequency?
The margin of detection distance increases
Long-range detection
M8 / M12 / M18 / M30 thread type In addition to the standard distance type, there is also a long-distance type (model with "K" in the model).
Longer detection distances and greater degrees of freedom.
The margin of detection distance increases
Even if the distance to the detected object varies due to the vibration of the device, it is not prone to shock and detection errors
When the distance to the detected object changes due to vibration and aging of the device, false detections such as "undetectable" may occur.
In addition, if the installation distance is shortened due to fear that it will not be detected, it may break due to contact.
The detection distance of the long-range type has been extended, and the degree of freedom in setting has been increased.
Even if the distance to the detected object varies due to the vibration of the device, it is not prone to shock and detection errors
Reduces the error of the maximum working distance
The GX-300GX-300 series controls the error of the maximum working distance to ±10%.
*15% of the GX series in ±the conventional model
The M8 thread type has been reduced compared to conventional products.
Increased usability
The indicator light can be seen from any position at 360°
The indicator light can be seen from any direction, making it easy to check settings and operations.
The product range is complete
In addition to the cable type (cable length 2m/5m), the direct mounting connector type and the relay connector type are also available.
In addition, a bend-resistant cable type (cable length 2m/5m) is also available, so it can be easily installed on movable parts
The product range is complete
Contribute to IoTization
IO-Link is supported
From a sensor that only performs ON/OFF judgment
Evolution to sensors that can transmit detection volume and status signals
*Only the PNP output of the M8/M12/M18/M30 threaded type, and the ON type supports IO-Link when approaching.
◆ IO-Link-compatible sensors can be used as general sensors (PNP output type).
◆ IO-Link-enabled sensors can be connected to the IO-Link host to transmit not only ON/OFF signals, but also sensor level information and action mode switching information in both directions, contributing to the visualization and IoT of manufacturing sites.
※ CC-Link IE Field and CC-Link are trademarks of Mitsubishi Electric Corporation and are managed by the CC-Link Association.
DeviceNet and EtherNet/IP are ODVA (Open DeviceNet Vender Association, Inc.) Registered trademarks.
EtherCAT is a registered trademark of Beckhoff Automation GmbH.
Modbus is a registered trademark of Schneider Automation, Inc.
IO-Link master unit
use
Positioning of machine tools
|
Previous : Panasonic-amplifier has a built-in ultra-thin photoelectric sensor EX-10M
Next : Panasonic - Cylindrical Proximity Sensor GX-100
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
National hot line: 020-31609801/0755-83221233 E-mail address: ykccmro@163.com
Guangzhou Add: Room 1501, Dongxin Technology Building, No. 3, Spectral West Road, Huangpu District, Guangzhou
Shenzhen Address: Room 601, 6th Floor, Building A5, Zhongxin Bao Optoelectronics Industrial Park, Huangtian Yangbei Industrial Zone, Hangcheng Street, Baoan District, Shenzhen
Shantou Address: No.167, Pujiang East Road, Longhu District, Shantou City, Guangdong Province
Copyright © 2022 Guangzhou Cloud Control Supply Chain Technology Co., LTD. Guangdong ICP 16099015 site map
National hot line: 020-31609801/0755-83221233 E-mail address: ykccmro@163.com
Guangzhou Add: Room 1501, Dongxin Technology Building, No. 3, Spectral West Road, Huangpu District, Guangzhou
Shenzhen Address: Shenzhen Baoan District Hang Cheng Street Huangtian Yangbei Industrial Park A5 building 6F 601
Shantou Address: No.167, Pujiang East Road, Longhu District, Shantou City, Guangdong Province
Copyright © 2022 Guangzhou Cloud Control Supply Chain Technology Co., LTD. Guangdong ICP 16099015 site map
